- Starter Kits
- Vape Juice
- Top Brands
- Top Selling
- See All
Introducing the new Aspire 220 watt Dynamo kit. It allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can also be used in various modes, allowing you to easily select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). It comes in five super colors Dark Grey, Red with Black, Rainbow, Purple, and Camo with Black, all have the new Nepho tank in complementary colors.
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 220 watts regardless of which type of battery is used, 18650, 20700 or 21700.
The new press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspires all new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports. Coil installation couldn’t be easier, simply unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank. The new Nepho coils are now press fit so are much less messy to handle when replacing.
Introducing Watch UI
Press fire button to enter. When you are in “Time Set” press fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod, we’ve created 11 different types of Watch UI to expand your choices.
Charging the mod via Micro-USB charging port, the charging current can reach up to 2A . When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging the screen will shut off.
The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging, please unplug the charging cable before changing the batteries.
- Dimensions: 137 x 91 x 49mm
- Battery: 2 x 21700/20700/18650 cells (Not Included)
- Max 220W
- Round 0.2-inch TFT Color Display
- Temperature Range: 200℉-600℉/100℃-315℃
- Spring-loaded 510 connector
- 4ml Tank capacity
- Compatible with 0.5ohm KA coil/0.15ohm Mesh coil
- Nepho 0.15ohm mesh coil & 0.15ohm KA coil
- Easy Press-To-Fit Coil Installation
- Support 2A QC and USB charging
- Top Fill Design
- Bottom Airflow Control
- 1x Aspire Dynamo mod
- 1x 4ml Nepho Tank
- 1x Glass tube
- 8x O-rings
- 1x 0.5ohm coil
- 1x 0.15ohm mesh coil
- 1x USB Cable
- 1x Warning card
- 1x Warranty card
- User manual
Check out the new Aspire Tigon Kit
No - 2 x 18650 Batteries sold separately